PSI-MOS-RS422/FO 850 E

https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) FO converter with integrated optical diagnosis, alarm contact, for RS-422/RS-485 4-wire/ INTERBUS to 2 Mbps, terminal equipment with an FO interface (BFOC), 850 nm, for HCS/fiber glass cable Product Features  Supply voltage routed through via DIN rail connectors  Connections can be plugged in using a COMBICON screw terminal block  High-quality electrical isolation between all interfaces (INTERBUS // fiber optic ports // power supply // DIN rail connector)  Redundant power supply possible by means of optional system power supply unit  Approved for use in zone 2  Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1  Integrated optical diagnostics for continuous monitoring of fiber optic paths  Floating switch contact for leading alarm generation in relation to critical fiber optic paths  Automatic data rate detection for all data rates up to 2 Mbps         Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 229.16 GRM Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 35 mm 10/10/2014   Page 1 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Technical data Dimensions Height 99 mm Depth 103 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 30 % ... 95 % (non-condensing) Altitude 5000 m (For restrictions see manufacturer's declaration) Degree of protection IP20 Noise immunity EN 61000-6-2:2005 General Transmission channels 2 (1/1) RD, TD, full duplex Bit distortion, input ± 35 % (permitted) Bit distortion, output < 6.25 % Electrical isolation VCC // RS-422 Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 55011 Net weight 190 g Housing material PA 6.6-FR Color green MTBF 320 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 48 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) Conformance CE-compliant ATEX  II 3 G Ex nAC IIC T4 X (Please follow the special installation instructions in the documentation!)  II (2) GD [Ex op is] IIC (PTB 06 ATEX 2042 U) (Please follow the special installation instructions in the documentation!) UL, USA / Canada Class I, Zone 2, AEx nc IIC T5 Class I, zone 2, Ex nC nL IIC T5 X Class I, Div. 2, Groups A, B, C, D Power supply Supply voltage range 18 V DC ... 30 V DC Max. current consumption 130 mA Typical current consumption 120 mA (24 V DC) Connection method COMBICON plug-in screw terminal block 10/10/2014   Page 2 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Technical data Serial interface Interface 1 RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1 Operating mode Full duplex Connection method Pluggable screw connection Transmission medium Copper Transmission length ≤ 1000 m (depending on the data rate, with shielded, twisted data cable) Termination resistor 220 Ω 100 Ω 220 Ω Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 14 Serial transmission speed ≤ 2 Mbps Optical interface FO Transmit capacity, minimum -4.6 dBm (200/230 µm) -17.6 dBm (50/125 µm) -13.6 dBm (62,5/125 µm) Minimum receiver sensitivity -33.2 dBm Wavelength 850 nm Transmission length incl. 3 dB system reserve 2800 m (with F-K 200/230 8 dB/km with quick mounting connector) 4200 m (with F-G 50/125 2.5 dB/km) 4800 m (with F-G 62,5/125 3.0 dB/km) Transmission medium HCS fiber Multi-mode fiberglass Transmission protocol Transparent to protocol for RS-422 interface Connection method B-FOC (ST ) ® Digital outputs Output name Relay output Output description Alarm output Number of outputs 1 Maximum switching voltage 60 V DC 42 V AC Limiting continuous current 0.46 A 10/10/2014   Page 3 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Classifications eCl@ss eCl@ss 4.0 27230207 eCl@ss 4.1 27230207 eCl@ss 5.0 27230207 eCl@ss 5.1 27230207 eCl@ss 6.0 27230207 eCl@ss 7.0 27230207 eCl@ss 8.0 27143136 ETIM ETIM 2.0 EC001423 ETIM 3.0 EC001423 ETIM 4.0 EC001423 ETIM 5.0 EC001423 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 43201553 Approvals Approvals Approvals UL Recognized / cUL Recognized / DNV / cULus Recognized Ex Approvals ATEX / UL Listed / cUL Listed / cUL Listed / cULus Listed / cULus Listed Approvals submitted Approval details 10/10/2014   Page 4 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Approvals UL Recognized  cUL Recognized  DNV  cULus Recognized  Accessories Accessories Adapter Fiber optic coupling - PSM-SET-BFOC-LINK/2 - 2799429 Coupling; set consisting of 2 couplings for connecting B-FOC plugs     Assembly tool Assembly tool - PSM-HCS-KONFTOOL/B-FOC - 2708465 HCS assembly kit for B-FOC (ST) quick mounting connectors, including stripping blade, stripping pliers, aramide yarn scissors, fiber stripper, microscope, fiber cleaving tool for standard HCS and HCS GI fibers, and documentation     Connector set 10/10/2014   Page 5 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Accessories FO connectors - PSM-SET-B-FOC/4-HCS - 2708481 B-FOC (ST) connector set for HCS fiber, for self assembly consisting of 4 quick mounting connectors with bend protection sleeve     Data cable by the meter FO cable - PSM-LWL-HCS-RUGGED-200/230 - 2799885 HCS cable, duplex 200/230 µm, by the meter, without connector, for indoor installation     FO cable - PSM-LWL-HCSO-200/230 - 2799445 HCS cable, duplex 200/230 µm, by the meter, without connector, for outdoor installation     FO cable - PSM-LWL-GDM-RUGGED- 50/125 - 2799322 Fiberglass cable, duplex 50/125 µm, by the meter, without connector, for indoor installation     FO cable - PSM-LWL-GDO- 50/125 - 2799432 Fiberglass cable, duplex 50/125 µm, by the meter, without connector, for outdoor installation     10/10/2014   Page 6 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Accessories Data cable preassembled FO patch cable - FL MM PATCH 1,0 LC-ST - 2989174 Assembled fiber optic cable, break-out cable, fiberglass multi-mode 50/125 µm, connector: LC/B-FOC (ST), degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m     FO patch cable - FL MM PATCH 2,0 LC-ST - 2989271 Assembled fiber optic cable, break-out cable, fiberglass multi-mode 50/125 µm, connector: LC/B-FOC (ST), degree of protection: IP20, for installation in cable ducts or control cabinets, length: 2 m     FO patch cable - FL MM PATCH 5,0 LC-ST - 2901801 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, plug: LC / B-FOC (ST), protection type: IP20, for installation in cable ducts or control cabinets, length: 5 m     FO patch cable - FL MM PATCH 1,0 SC-ST - 2901809 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: SC Duplex / B-FOC, protection type: IP20, for installation in cable ducts or control cabinets, length: 1 m     FO patch cable - FL MM PATCH 5,0 SC-ST - 2901811 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: SC Duplex / B-FOC (ST), protection type: IP20, for installation in cable ducts or control cabinets, length: 5 m     10/10/2014   Page 7 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Accessories FO patch cable - FL MM PATCH 1,0 ST-ST - 2901815 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: B-FOC (ST) / B-FOC (ST), protection type: IP20, for installation in cable ducts or control cabinets, length: 1 m     FO patch cable - FL MM PATCH 2,0 ST-ST - 2901816 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: B-FOC (ST) / B-FOC (ST), protection type: IP20, for installation in cable ducts or control cabinets, length: 2 m     FO patch cable - FL MM PATCH 5,0 ST-ST - 2901817 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: B-FOC (ST) / B-FOC (ST), protection type: IP20, for installation in cable ducts or control cabinets, length: 5 m     FO patch cable - FL MM PATCH 1,0 ST-SCRJ - 2901820 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: SC Duplex / SCRJ, protection type: IP20, for installation in cable ducts or control cabinets, length: 1 m     FO patch cable - FL MM PATCH 2,0 ST-SCRJ - 2901821 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: B-FOC (ST) / SCRJ, protection type: IP20, for installation in cable ducts or control cabinets, length: 2 m     10/10/2014   Page 8 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Accessories FO patch cable - FL MM PATCH 5,0 ST-SCRJ - 2901822 Assembled FO cable, break out cable, multi-mode fiberglass 50/125 µm, connector: B-FOC (ST) / SCRJ, protection type: IP20, for installation in cable ducts or control cabinets, length: 5 m     Data plug D-SUB bus connector - SUBCON-PLUS 9/F - 2744241 D-SUB connector, 9-pos. female connector, two cable entries < 35°, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to one screw connection terminal block     D-SUB bus connector - SUBCON-PLUS 9/M - 2744018 D-SUB connector, 9-pos., male connector, two cable entries < 35°, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to one screw connection terminal block     DIN rail connector Electronic housing - ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - 2709561 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Interface converter 10/10/2014   Page 9 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Accessories Interface converter - PSM-ME-RS232/RS485-P - 2744416 Interface converter, for converting RS-232 (V.24) to RS-422 (V.11) and RS-485, with electrical isolation, 2 channels, railmountable     Measuring tools Measuring instrument - PSM-FO-POWERMETER - 2799539 Fiber optic measuring case, consisting of an optical power meter, F-SMA, B-FOC adapters, reference fibers and operating instructions     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Screwdriver tools Screwdriver - SZS 0,4X2,5 VDE - 1205037 Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip     DIN rail connector - ME 17,5 TBUS 1,5/PP000-3,81 BK - 2890014 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 2-pos.     10/10/2014   Page 10 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Drawings Application drawing Application drawing Master Master E E FO FO E T Slaves: 1 x RS-422 Max. 31 x RS-485 4-wire Slaves: 1 x RS-422 Max. 31 x RS-485 4-wire FO T .... Slaves: 1 x RS-422 Max. 31 x RS-485 4-wire FO Point-to-point connection Master/Slave line structure Application drawing Application drawing Master T T E INTERBUS Master ... E FO FO REMOTE IN REMOTE OUT E E E E E E E FO REMOTE IN Star structure Slaves: 1 x RS-422 Max. 31 x RS-485 4-wire E INTERBUS with PSI-MOS-RS-422 10/10/2014   Page 11 / 12 https://www.phoenixcontact.com/us/products/2708355 FO converters - PSI-MOS-RS422/FO 850 E - 2708355 Application drawing Catalog photo Master T T T ... LWL(FO) T T T Slaves: 1 x RS-422 max. 31 x RS-485-4-wire Redundant structure Figure may contain other products. Block diagram *) only with PSI-MOS.../FO...T Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 12 / 12